Now available on-line from the Joint BioEnergy Institute (JBEI) are two new, improved versions of a technoeconomic model created in 2010 to accelerate the development of next generation biofuels that are economically competitive with petroleum-based fuels. Incorporating the latest state-of-the-art technologies relevant to bioethanol production, these new wiki-based models simulate critical factors in the biorefinery process, such as production costs and energy balances, under different scenarios. This enables researchers to concentrate their efforts on the most promising strategies for cost-efficient biorefinery operations. Both new models correspond to refinery process configuration and performance scenarios, with one reflecting the best current technologies and the other reflecting projected technological developments.
“Two aspects were improved in the new models, configuration and performance, configuration, which encompasses the chemical engineering steps in the biorefinery process, and performance, which looks at how well each of those steps accomplish their intended purpose,” says Daniel Klein-Marcuschamer, a researcher with JBEI’s Deconstruction Division and one of the creators of both the original and the latest versions of the technoeconomic models. “The configuration is the same for both models, but the models differ in key process performance parameters, such as pretreatment, saccharification, and fermentation.”
Like their predecessor, the new models are formulated to simulate a lignocellulosic ethanol biorefinery that uses corn stover feedstock. From a comprehensive set of fuel production input factors, users can calculate the resulting ethanol, energy and greenhouse gas output, and can derive production costs, then vary the input values to test the effectiveness of different processing strategies. Murthy Konda, also with JBEI’s Deconstruction Division, working with Klein-Marcuschamer, updated the original technoeconomic model on the basis of research and analytical studies published since 2010.
“Over the last few years, there has been a significant research effort globally within the field of biofuels,” Konda says. “Subsequently, there is a need to ensure that the model-based tools such as our techno-economic models are up-to-date. Addressing this need is our current release of updated models. As before, we expect these new models will continue to be useful to biofuel research community. Eventually, we will be modeling scenarios for other types of biofuels using other types of feedstocks. Already we have started modeling biorefineries based on JBEI’s in-house ionic liquid pretreatment of biomass technologies.”
The new models have been released in the same wiki as the original along with accompanying notes. The 2010 model is still accessible so that current users can transition to the new models as needed. First-time users are encouraged to use the new models to take advantage of the updated research results and software.
Development of the JBEI technoeconomic models has been supported by Blake Simmons, who heads JBEI’s Deconstruction Division, and Harvey Blanch, JBEI’s Chief Science and Technology Officer. Both hold appointments with Berkeley Lab’s Physical Biosciences Division as do Konda and Klein-Marcuschamer.
JBEI is one of three Bioenergy Research Centers funded by the U.S. Department of Energy to advance the development of the next generation of biofuels. It is a scientific partnership led by Berkeley Lab and including the Sandia National Laboratories, the University of California (UC) campuses of Berkeley and Davis, the Pacific Northwest National Laboratory, the Carnegie Institution for Science, and the Lawrence Livermore National Laboratory.
Source: Lawrence Berkeley National Laboratory
For more information on: Lawrence Berkeley National Laboratory