Aircraft Mechanic - Airframe

United States
Job Description

· Performs hydraulic system, structural and sheet metal repairs and modifications to aircraft, accessories and associated equipment. Must be knowledgeable with the operation and maintenance of hydraulic/structural metal equipment and machinery. Applies comprehensive technical knowledge and experience to solve hydraulic/structural repair problems. Provides technical assistance, guidance and instruction to employees in the Aircraft Airframes Mechanic classification.

· Possess in depth knowledge of aircraft hydraulic/structural maintenance practices, applicable maintenance/ technical manuals and publications, basic tools, special tools, test equipment and the opera-tion and maintenance of structural repair equipment and machinery. Must have working knowledge of corrosion detection, prevention and treatment. May be required to perform Leadman duties when designated and authorized.

· Must be customer oriented.


· Inspects hydraulic systems, structural repairs, modifications, removal, replacement and reinstallation actions; part fabrication; layouts, templates, etc., inspect for structural integrity, quality and complete-ness of work.

· Troubleshoot, service and repair aircraft, airframes and systems to ensure air-worthiness.

· Determine feasibility and method of repairing or replacing malfunctioning or damaged components using manufacturer’s manuals, service bulleting and applicable publications.

· Performs miscellaneous duties to include turn flushing, cleaning, lubing of aircraft systems and components.

· Sets-up, trouble shoot, repair, and demonstrate correct usage of shop metal working equipment, hand tools, powered tools, fastener installation tooling and fixtures that are used for aircraft hydraulic/structural maintenance.

· Develops, designs, recommends, and determines structural repair and replacement requirements and procedures to include but not limited to fastener and material type, damaged area cutouts, etc.

· Develops, designs, recommends, inspects and determines metal, plastic, phenolic and fiberglass part fabrication procedures and template requirements to include layout, fastener and material type, quality and completeness of work.

· Assists in P&E report preparation.

· Sets-up and uses sight levels and transits. Performs aircraft optical alignment checks as required..

· Assist in weighing aircraft and completes weight and balance data configurations reports/forms.

· Use schematics, drawings, charts and other applicable publications to troubleshoot, repair, test and modify assigned systems.

· Performs flight control and landing gear rigging.

· Be able to become aircraft turn-up certified as directed by management.

· Repair, replace major aircraft structures such as wings, fuselage, and landing gear systems.

· Assist in the removal and replacement of aircraft engines utilizing appropriate support equipment.

· Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance recovery team or detachment as required.

· Will have experience writing with clarity and technical accuracy.

· Performs aircraft inventory, acceptance and transfer inspections.

· Be capable of becoming Plane Captain certified when directed my management.

· Perform other tasks as directed by management.

· Provides technical assistance, guidance and instruction as required.

· Maintains and/or completes required records and applicable maintenance forms

· Become CDI/CDQAR certified as directed by management to perform collateral duty inspection assignments

· Performs daily duties normally associated with this specialty.

· Practice good housekeeping, tool control, FOD awareness/prevention and safety at all times.

· Comply with Hazardous Waste Program.

· Operates SE, flight line vehicles and other support equipment as required.

· Qualified to perform corrosion detection, treatment, prevention and documentation Assists in air-craft/equipment movement and flight line foreign object prevention walks.

· Annotates maintenance actions in aircraft forms and VIDS/MAF, Work Orders in NALCOMIS/OOMA.

· Will have knowledge of and understand basic supply procedures. Assist with ordering parts, tools, materials and equipment as required.

· Must comply with established General and Industrial Safety Rules and Regulations as applicable to the contract, facilities and job assignment.

· Keeps shop area clean and participate in daily hanger cleanups


· Aircraft mechanics shall have three years experience in their specific aircraft maintenance occupational field. The last two years must have been as a practicing licensed FAA airframe and power plants mechanic; in the military; civil service (WG-7-10), or with a government aviation maintenance Contractor.

· Must have experience in corrosion detection, treatment and prevention.

· Personnel shall be qualified according to their field of expertise and the level of maintenance as-signed, i.e., “O” or “I” level.

· The mechanic will be capable of cross-training into or assisting other specialties as directed by management. All mechanics must be capable of becoming Plane Captain certified when directed by management IAW a Government approved certification program for each TMS of aircraft.]

· Must possess or be able to obtain/maintain a US Government Secret Clearance. NOTE: US Citizenship is required to obtain a Secret Clearance.

· Must have completed high school or equivalent.

· Will have experience writing with clarity and technical accuracy.

· Must read, write, speak, and understand English.


**Physical Demands:**

This classification activity requires the scope of physical movements and postures normally associated with shop/hanger/flight line maintenance activities to include bending, stooping, walking, climbing, pushing, stretching, kneeling and working in tiring, uncomfortable positions, etc. May be required to lift objects whose weight normally will not exceed 50 pounds. Special vision abilities required to perform this job are close vision, peripheral vision, depth perception and the ability to adjust and focus.

**Work Environment:**

The diversity of work conditions may range from an environment where there is little or no physical dis-comfort, to an environment where inclement weather may subject individual to severe changes of temperature, wind, rain, etc. May be required to work in areas where high noise hazards prevail. May be ex-posed to electrical shock hazards. May be exposed to fumes or airborne particles.


· Driver’s License

· Egress/Explosive System Checkout

· Support Equipment Operator as required for assigned tasks

· Plane Captain Certification/Final Checker


· Emergency Reclamation

· Tow Supervisor/Tow Brake Operations

· Respirator

· CPR Certification

· Hydraulic Tester (HCT-10)*

· Hydraulic Contamination

· Confined Space Entry as required

· Barrier monitor

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.

EEO is the Law Poster (\_self\_print\_poster.pdf)

EEO is the Law Poster Supplement

United States